When buying an air conditioner, most buyers often decide based on low operating costs and cooling efficiency. Selecting the right air conditioner capacity based on the room size is also important to consider. Before purchasing the best AC 2 ton unit, look for the cooling capacity measured in BTUs with the dimensions of the area to cool. You have to estimate the room area in square feet. So, depending on your room’s length and width, multiply it. Know why it’s important to select the appropriate AC according to the accurate room size from this article.
What is the Cooling Capacity of AC?
The cooling capacity of an AC is the standardized measurement of the cooling system for removing heat from the room. The SI units are tons, which signals how much water gets frozen at a particular temperature in a particular amount of time. So, cooling capacity is often referenced via tonnage. That is, when someone says best AC 2 ton, they mean the cooling capacity and not simply the air conditioner weight or size.
However, to calculate the AC capacity as per the correct room size, you also need to be aware of the BTUs. In simple words, BTUs (British Thermal Units) mean every hour, how much heat a unit can dissolve from the air.
How to Calculate the AC Size?
If you are among those who make their decision in haste, at least avoid so while choosing your next 1 ton AC. With the help of simple mathematical calculations, you can decide which AC size will be fit for your room. Here’s how-
● You have to multiply your room area’s length and breadth. Take, for instance, the length and width of the space is (100*100) ft.
● Then multiply the total room area by 25 BTU. That is 100*100*25= 250000 BTU. It means that the 250000 BTU cooling capacity of the best AC 2 ton unit will match the room size.
By such a simple calculation, you can make a smart air conditioner choice beforehand. Most people are stuck on the AC capacity and end up installing air conditioners of smaller or larger sizes.
FAQ
Does Split AC of 2 Ton consume more electricity than other tonnage models?
A 2-ton split AC takes up nearly 2,000 watts of power. So, naturally, the electricity consumption will be extra compared to 1 or 1.5-ton models. However, some of the best AC 2 ton models from reliable brands are energy efficient with 5-star ratings. Other than the AC tonnage, the electricity consumption factor depends on many other considerations, such as the room dimension, total AC running time, energy ratings, etc.
AC Size and Energy Efficiency
Other than the tonnage factor, buying an energy-efficient air conditioner also matters. You can get an idea of the energy efficiency of the best AC 2 ton with its star ratings. More star ratings mean lesser consumption of electricity. Particularly, higher star models are recommended where AC runs for the entire day and night. Here’s the AC tonnage and power consumption chart-
● 1 ton AC consumes 1,000 watts (approx)
● 1.5 ton AC consumes 1,500 watts (approx)
● 2-ton AC consumes 2,000 watts (approx)
● 3-ton AC consumes 3,000 watts (approx)
So, if you have a split 2 ton or more that runs for fewer hours, it’s fine to consider 3-star rating models, too.
Importance of Best AC 2 Ton for Correct Room Size
Even the best AC 2 Ton for smaller rooms will be unwise for someone who thinks bigger for maximum cooling. It is so because it will consume extra wattage than what is needed for cooling.
Similarly, for a bigger hall room, if you install a 1 ton AC, you will need more. As a result, you will frequently run your AC due to the low BTW unit and ultimately pay for extra electricity consumed. So, do a favour to yourself and calculate the BTU unit after measuring your room area. The below list will guide you in this case-
● Up to 100 sq ft., you can install a 0.8-ton air Conditioner.
● Up to 150 sq. ft, a 1 ton AC will cool effectively.
● Till 250 sq. ft., choose a 1.5-ton AC unit.
● Up to 400 sq. ft, 2.0 Ton air conditioner recommended.
Besides that, buying a lower tonnage capacity AC than what’s required will compromise the overall air conditioner life. It is so because it will consume more energy to offer optimum cooling thereby exhausting the machine parts in the long run.
End Thoughts
To sum up, while selecting the best AC 2 ton, it’s important to consider the correct room size as that will ensure prolonged AC durability. Placing a 2-ton AC in smaller rooms will consume extra wattage. At the same time, 1-ton air conditioner models in bigger rooms won’t cool efficiently. So, before installing any AC unit, measure the room size, calculate the overall cooling capacity, and save electricity wisely.